GiroDisc GP40 Sprint Racing Brake Pads.

• Medium to high brake friction
• Low pad and rotor wear rate
• These pads are made in Japan for GiroDisc.

XP24 is the highest friction compound in Carbotech's line. Very strong initial bite with a flat torque curve and excellent modulation

• Should only be used with race tires and aggressive applications where high heat and friction are constant and expected
• Pre-bedding is suggested and best used with new rotors
• Temperature range 400-2000° F
• Extremely High Torque - High Bite

XP20 compound is a high friction and high temperature racing and advanced DE compound with very high fade resistance and excellent modulation

• Has low rotor wear for a high friction pad. Best on heavier cars with very aggressive street or race tires
• Temperature range 275- 2000° F
• Very High Torque - High Initial Bite

XP12 compound has excellent initial bite and a medium to high flat torque curve. Renowned modulation and lower rotor wear. XP12 does dust but cleans more easily than most

• Works for aggressive street car and tire HPDE. Recommended for racing in medium HP and weight classes
• Temperature range 250-2000° F
• Medium to High Torque and Initial Bite

XP10 compound has controllable initial bite and a flat torque curve. Most popular on the rear of modern high HP sports cars for aggressive HPDE on 'street' tires

• Low rotor wear and manageable dust. XP10 can be considered for very aggressive street use but dust, noise and rotor wear is expected
• Temperature range 200-1650° F
• Medium Torque - Medium Initial Bite

XP8 is a medium friction compound that can be balanced with XP10 compounds as needed. Can also be used for HPDE where lower friction and heat load is desired such as beginner and novice run groups

• XP8 has lower rotor wear and manageable dust. XP8 can also be considered for aggressive street use but dust, noise and rotor wear should be expected
• Temperature range 200°F - 1350°F
• Medium Torque - Medium Initial Bite

RP2 was engineered for endurance racing especially with lighter weight, lower horsepower cars with less tire friction

• RP2 has solid initial bite and excellent wear when kept within temperature
• Temperature range 250-1650° F
• Medium Torque - Good Initial Bite

Previously Hawk's highest friction race pad and most popular high friction formula. This compound is designed for higher power/weight cars with high deceleration rates

• Can be used on the front with DTC-60 rear if staggered friction is desired. Race or near race tires recommended. Aggressive DE, road race and asphalt circle track cars
• Temperature range 400-1,600° F - Optimal 800 -1200° F
• Very High Torque - Very High Initial Bite

DTC-60 compound is a medium to high friction compound designed for excellent torque control and modulation. DTC-60 can be used in the rear with DTC-70 front for a staggered setup. Can be used with race tires or aggressive (200TW) street tires

• Good for higher power/weight road cars at 'HPDE' type events and more moderate load race cars
• Temperature range 400-1600°F - Optimal 700-1100°F
• High Torque - High Initial Bite

The Hawk Performance endurance racing compound is well rounded with ideal modulation and pedal communication across a wide temperature range.

• Ideal for endurance racing, HPDE, and club racing
• Temperature range 400-1,600° F - Optimal 700 -1100° F
• Consistent medium-to-high friction

Ideal for professional sports car racing, club racing, vintage muscle cars, high horsepower off-road and stadium/short course vehicles

• Temperature range N/A - Optimal 300-1,400°F
• Moderate to High Torque - Aggressive Initial Bite

DTC-30 offers controllable torque with smooth feel and bite. Designed for lower friction track or heavy street applications. Lighter track cars with lower power and/or tire grip

• Can be used in aggressive street and autocross applications but will dust and increase rotor wear
• Temperature range 100-1000° F - Optimal 200-800° F
• Low to Medium Torque - Moderate Initial Bite

R18 compound is G-LOC's highest friction compound. Very strong initial bite with a flat torque curve and excellent modulation. Should only be used with race tires and aggressive applications where high heat and friction are constant and expected

• Pre-bedding is suggested and best used with new or G-LOC bedded rotors
• Temperature range 610-2100° F
• Extremely High Torque - High Bite
• Pads may be made to order and take 7-10 days in production.
• G-LOC Policy "WE CANNOT CANCEL ORDERS OR ACCEPT RETURNS"

R16 compound is a high friction and high temperature racing and advanced DE compound with very high fade resistance and excellent modulation. Has low rotor wear for a high friction pad

• Best on heavier cars with very aggressive street or race tires
• Temperature range 255- 2000° F
• Very High Torque - High Initial Bite
• Pads may be made to order and take 7-10 days in production.
• G-LOC Policy "WE CANNOT CANCEL ORDERS OR ACCEPT RETURNS"

R14 was engineered for endurance racing especially with lighter weight, lower horsepower cars with less tire friction

• R14 has solid initial bite and excellent wear when kept within temperature
• Temperature range 210-1400° F
• Medium Torque - Good Initial Bite
• Pads may be made to order and take 7-10 days in production.
• G-LOC Policy "WE CANNOT CANCEL ORDERS OR ACCEPT RETURNS"

R12 compound has excellent initial bite and a medium to high flat torque curve. Renowned modulation and lower rotor wear. R12 does dust but cleans more easily than most

• Works for aggressive street car and tire HPDE. Recommended for racing in medium HP and weight classes
• Temperature range 200-1860° F
• Medium to High Torque and Initial Bite
• Pads may be made to order and take 7-10 days in production.
• G-LOC Policy "WE CANNOT CANCEL ORDERS OR ACCEPT RETURNS"

The R10 compound has a controllable initial bite and a flat torque curve.

• Most popular on the rear of modern high HP sports cars for aggressive HPDE on 'street' tires
• Higher coefficient of friction than the R8 compound
• Smooth release, excellent modulation and rotor friendliness
• Broad temperature range that begins at 118°F and a fade resistance is in excess of 1475°F
• Pads may be made to order and take 7-10 days in production.
• G-LOC Policy "WE CANNOT CANCEL ORDERS OR ACCEPT RETURNS"

Cobalt XR1 is an extremely high torque material with an aggressive initial bite and medium-high, linear rising torque curve.

• Excellent friction stability and consistency coupled with very good modulation
• The XR1 material has unmatched disc life and finish versus any other competing friction material of comparable torque
• Well-suited for a wide range of platforms, including those with active aerodynamic profiles as well as limited downforce applications
• Great threshold control and release characteristics over the industry's broadest operating temperature range

Cobalt XR2 is a high torque material featuring an initial bite that is 8-10% lower than XR1, but with the same controlled transition to a linear, rising torque curve.

• Improved modulation, threshold control and release characteristics
• XR2 is well-suited for chassis and tire combinations which do not respond well to excessive initial brake energy, but still require a high average torque level.
• vehicles normally equipped with XR1 can move directly to the XR2 when low-grip conditions present themselves unexpectedly
• Will not sacrifice or experience a change in pedal feel, consistency, or brake capacity

Cobalt XR3 is a versatile, medium-high torque material with a solid initial bite and a slightly rising torque curve.

• Unsurpassed cold performance, torque stability, consistency and modulation/release for this level of friction
• XR3 is an ideal compound for Club Racing and Track Day/HPDE customers, particular in moderate to lower inertia vehicles
• Also recommended for rear-axle use on vehicles over 2800lbs
• Delivers optimal straight-line braking performance, stability and controlled rotation while trailbraking

Cobalt XR4 is a medium torque compound sharing a similar application basis as our popular XR3 material, but at lower overall friction levels.

• Slightly rising torque curve at low to moderate line pressures, transitioning to a virtually flat profile at higher line pressures and temperatures
• XR4 is primarily a rear-axle compound for vehicles under 2800lbs
• the excellent cold performance, friction stability and consistency of the XR4 also make it a class-leading autocross compound on vehicles up to 3200lbs

Cobalt XR5 is a specialized low torque material designed specifically for rear-axle applications on vehicles exhibiting a rapid rate and high magnitude of weight transfer under braking.

• Solid initial bite with a perfectly flat torque profile
• Negative torque gain versus temperature
• Able to transition to a negative slope virtually eliminates rear lock-up.

Wilwood B Compound Brake Pad

• High friction, smooth initial response
• Steady rise in friction as temperature increases
• Low wear rate

Wilwood BP-35 Compound Brake Pad

• Medium-high friction pad with low temperature response
• Smooth predictable pedal feel
• Medium-low pad wear
• High performance track day and race pad

Wilwood BP-28 Compound Brake Pad

• Medium-high friction pad with low temperature response
• Smooth predictable pedal feel
• Medium-low pad wear
• High performance track day and race pad

Wilwood BP-40 Compound Brake Pad

• Very high friction pad with aggressive intial response
• Immediate low temperature response
• Low wear rate during sustained high heat braking
• Predictable and linear response with excellent modulation