Subaru V2 Rear STI Brembo Caliper Upgrade

XP8 compound is a moderate friction race compound that can be balanced with XP10 compounds as needed for excellent braking control. Can also be used as an HPDE compound where lower friction and heat load is desired such as beginner and novice run groups. XP8 compound has lower rotor wear and manageable dust. XP8 can be considered for some aggressive street use but dust, noise and rotor wear is expected.

<h3>XP8</h3>
<table width="80%" border="0">
 <tr>
 <td width="20%">Temp. Range:</td>
 <td width="80%">200-1350° F (93°C – 732°C)</td>
 </tr>
 <tr>
 <td>Torque:</td>
 <td> Medium</td>
 </tr>
 <tr>
 <td>Recommended Use: </td>
 <td>HPDE compound where lower friction and heat load is desired such as beginner and novice run groups.</td>
 </tr>
</table>
&nbsp;
PLEASE NOTE:
 Some pad shapes may require a non-refundable core charge. Contact us to see if your application requires a non-refundable core charge.
Carbotech does NOT recommended XP8 for daily use on the street due to elevated levels of dust and noise and the amount of heat needed to work properly.

Carbotech XP8 Brake Pads

XP8 is a medium friction compound that can be balanced with XP10 compounds as needed. Can also be used for HPDE where lower friction and heat load is desired such as beginner and novice run groups 
<ul>
<li>XP8 has lower rotor wear and manageable dust. XP8 can also be considered for aggressive street use but dust, noise and rotor wear should be expected</li>
<li>Temperature range 200°F - 1350°F</li>
<li>Medium Torque - Medium Initial Bite</li>
</ul>

Temp. Range:	200-1350° F (93°C – 732°C)
Torque:	Medium
Recommended Use:	HPDE compound where lower friction and heat load is desired such as beginner and novice run groups.