(0 Items)
2018 Dodge Charger Hellcat ( Click To Change )
HOME PRODUCTS TECHNICAL INFO COMPANY CARS ABOUT KNS SHIPPING & FAQ CONTACT US
All Categories
Street Brake Pads
29
Race Brake Pads
66
Brake Rotors
2
Replacement Rotor Rings
3
Stainless Steel Brake Lines
3
Upgrade Items
2
Brake Hardware
1
Brake Fluids
11
Race Brake Pads
GiroDisc GP40 Brake Pads GiroDisc Sprint Racing Brake Pads
- Medium to high brake friction
- Low pad and rotor wear rate


These pads are made in Japan for GiroDisc.
Fitment: Front
$640.00
Hawk DTC-80 Brake Pads

This compound is designed for vehicles with higher top speeds that require repeated high deceleration rates. For heavier cars with higher HP and race tires. Road racing and asphalt circle track cars.

Temperature range 500-1,700° F - Optimal 600-1500° F

Extremely High Torque - Very High Initial Bite

Fitment: Front
$431.24
Fixed UPS Ground shipping!
Fitment: Rear
$332.24
Fixed UPS Ground shipping!
Hawk DTC-70 Brake Pads

Previously Hawk's highest friction race pad and most popular high friction formula. This compound is designed for higher power/weight cars with high deceleration rates. Can be used on the front with DTC-60 rear if staggered friction is desired. Race or near race tires recommended. Aggressive DE, road race and asphalt circle track cars.

Temperature range 400-1,600° F - Optimal 800 -1200° F

Very High Torque - Very High Initial Bite

Fitment: Front
$309.74
Fixed UPS Ground shipping!
Fitment: Rear
$239.24
Fixed UPS Ground shipping!
Hawk DTC-60 Brake Pads

DTC-60 compound is a medium to high friction compound designed for excellent torque control and modulation. DTC-60 can be used in the rear with DTC-70 front for a staggered setup. Can be used with race tires or aggressive (200TW) street tires. Good for higher power/weight road cars at 'HPDE' type events and more moderate load race cars.

Temperature range 400-1600°F - Optimal 700-1100°F

High Torque - High Initial Bite

Fitment: Front
$273.74
Fixed UPS Ground shipping!
Fitment: Rear
$188.99
Fixed UPS Ground shipping!
Hawk DTC-50 Brake Pads

Ideal for professional sports car racing, club racing, vintage muscle cars, high horsepower off-road and stadium/short course vehicles.

Temperature range N/A - Optimal 300-1,400°F

Moderate to High Torque - Aggressive Initial Bite

Fitment: Rear
$170.24
Fixed UPS Ground shipping!
Hawk DTC-30 Brake Pads

DTC-30 offers controllable torque with smooth feel and bite. Designed for lower friction track or heavy street applications. Lighter track cars with lower power and/or tire grip. Can be used in aggressive street and autocross applications but will dust and increase rotor wear.

Temperature range 100-1000° F - Optimal 200-800° F

Low to Medium Torque - Moderate Initial Bite

Fitment: Front
$230.99
Fixed UPS Ground shipping!
Fitment: Rear
$164.24
Fixed UPS Ground shipping!
Hawk HT-10 Brake Pads

The HT-10 compound has good modulation and release characteristics, which makes it a great race pad for the weekend warrior. Road racing or pavement circle track use that requires more torque than Blue 9012.

Temperature range 300-1300° F - Optimal 500-1100° F

Intermediate to high torque with a smooth initial bite.

Fitment: Rear
$181.49
Fixed UPS Ground shipping!
Hawk Blue 9012 Brake Pads

Hawk's most popular Motorsport Compound offers excellent modulation and braking power for a wide variety of applications. Strong initial bite combines with exceptional pedal feel to give drivers confidence during road racing and stage rally events. Also popular with experienced lapping day and driver school participants. #1 selling brake pad material for SCCA.

Temperature range 250-1000° F - Optimal 350-800° F

Medium/High torque and excellent brake modulation.

Fitment: Rear
$162.74
Fixed UPS Ground shipping!
G-LOC R18 Brake Pads

R18 compound is G-LOC's highest friction compound. Very strong initial bite with a flat torque curve and excellent modulation. Should only be used with race tires and aggressive applications where high heat and friction are constant and expected. Pre-bedding is suggested and best used with new or G-LOC bedded rotors.
Some G-LOC pads are made to order which can take in 5-7 business days. Please inquire for details.

Temperature range 610-2100° F

Extremely High Torque - High Bite

Fitment: Front
$414.00
Fixed UPS Ground shipping!
Fitment: Rear
$242.25
Fixed UPS Ground shipping!
G-LOC R16 Brake Pads

R16 compound is a high friction and high temperature racing and advanced DE compound with very high fade resistance and excellent modulation. Has low rotor wear for a high friction pad. Best on heavier cars with very aggressive street or race tires.
Some G-LOC pads are made to order which can take 5-7 business days. Please inquire for details.

Temperature range 255- 2000° F

Very High Torque - High Initial Bite

Fitment: Front
$388.00
Fixed UPS Ground shipping!
Fitment: Rear
$226.10
Fixed UPS Ground shipping!
G-LOC R14 Brake Pads

R14 was engineered for endurance racing especially with lighter weight, lower horsepower cars with less tire friction. R14 has solid initial bite and excellent wear when kept within temperature.
Some G-LOC pads are made to order which can take in 5-7 business days. Please inquire for details.

Temperature range 210-1400° F

Medium Torque - Good Initial Bite

Fitment: Front
$369.00
Fixed UPS Ground shipping!
Fitment: Rear
$215.65
Fixed UPS Ground shipping!
G-LOC R12 Brake Pads

R12 compound has excellent initial bite and a medium to high flat torque curve. Renowned modulation and lower rotor wear. R12 does dust but cleans more easily than most. Works for aggressive street car and tire HPDE. Recommended for racing in medium HP and weight classes.
Some G-LOC pads are made to order which can take in 5-7 business days. Please inquire for details.

Temperature range 200-1860° F

Medium to High Torque and Initial Bite

Fitment: Front
$352.00
Fixed UPS Ground shipping!
Fitment: Rear
$205.20
Fixed UPS Ground shipping!
G-LOC R10 Brake Pads

R10 compound has controllable initial bite and a flat torque curve. Most popular on the rear of modern high HP sports cars for aggressive HPDE on 'street' tires. Also works on lighter race cars with lower heat and friction demands . Low rotor wear and manageable dust. R10 can be considered for very aggressive street use but dust, noise and rotor wear is expected.
Some G-LOC pads are made to order which can take in 5-7 business days. Please inquire for details.

Temperature range 186-1475° F

Medium Torque - Medium Initial Bite

Fitment: Front
$332.00
Fixed UPS Ground shipping!
Fitment: Rear
$193.80
Fixed UPS Ground shipping!
G-LOC R8 Brake Pads

R8 is a medium friction compound that can be balanced with R10 compounds as needed. Can also be used for HPDE where lower friction and heat load is desired such as beginner and novice run groups.. R8 has lower rotor wear and manageable dust. R8 can also be considered for aggressive street use but dust, noise and rotor wear should be expected.
Some G-LOC pads are made to order which can take in 5-7 business days. Please inquire for details.

Temperature range 200°F - 1250°F

Medium Torque - Medium Initial Bite

Fitment: Front
$307.00
Fixed UPS Ground shipping!
Fitment: Rear
$179.55
Fixed UPS Ground shipping!
Carbotech XP24 Brake Pads

XP24 is the highest friction compound in Carbotech's line. Very strong initial bite with a flat torque curve and excellent modulation. Should only be used with race tires and aggressive applications where high heat and friction are constant and expected. Pre-bedding is suggested and best used with new rotors.

Temperature range 400-2000° F

Extremely High Torque - High Bite

Fitment: Front
$414.20
Fixed UPS Ground shipping!
Fitment: Rear
$220.39
Fixed UPS Ground shipping!
Carbotech XP20 Brake Pads

XP20 compound is a high friction and high temperature racing and advanced DE compound with very high fade resistance and excellent modulation. Has low rotor wear for a high friction pad. Best on heavier cars with very aggressive street or race tires.

Temperature range 275- 2000° F

Very High Torque - High Initial Bite

Fitment: Front
$387.59
Fixed UPS Ground shipping!
Fitment: Rear
$207.10
Fixed UPS Ground shipping!
Carbotech XP12 Brake Pads

XP12 compound has excellent initial bite and a medium to high flat torque curve. Renowned modulation and lower rotor wear. XP12 does dust but cleans more easily than most. Works for aggressive street car and tire HPDE. Recommended for racing in medium HP and weight classes.

Temperature range 250-2000° F

Medium to High Torque and Initial Bite

Fitment: Front
$351.50
Fixed UPS Ground shipping!
Fitment: Rear
$195.70
Fixed UPS Ground shipping!
Carbotech XP10 Brake Pads

XP10 compound has controllable initial bite and a flat torque curve. Most popular on the rear of modern high HP sports cars for aggressive HPDE on 'street' tires. Also works on lighter race cars with lower heat and friction demands . Low rotor wear and manageable dust. XP10 can be considered for very aggressive street use but dust, noise and rotor wear is expected.

Temperature range 200-1650° F

Medium Torque - Medium Initial Bite

Fitment: Front
$331.55
Fixed UPS Ground shipping!
Fitment: Rear
$188.10
Fixed UPS Ground shipping!
Carbotech XP8 Brake Pads

XP8 is a medium friction compound that can be balanced with XP10 compounds as needed. Can also be used for HPDE where lower friction and heat load is desired such as beginner and novice run groups. XP8 has lower rotor wear and manageable dust. XP8 can also be considered for aggressive street use but dust, noise and rotor wear should be expected.

Temperature range 200°F - 1350°F

Medium Torque - Medium Initial Bite

Fitment: Front
$306.84
Fixed UPS Ground shipping!
Fitment: Rear
$180.50
Fixed UPS Ground shipping!
Carbotech RP2 Brake Pads

RP2 was engineered for endurance racing especially with lighter weight, lower horsepower cars with less tire friction. RP2 has solid initial bite and excellent wear when kept within temperature.

Temperature range 250-1650° F

Medium Torque - Good Initial Bite

Fitment: Front
$368.59
Fixed UPS Ground shipping!
Fitment: Rear
$201.39
Fixed UPS Ground shipping!
Ferodo DS3.12 Brake Pads

DS3.12 is a high-output, heavy duty circuit compound. It is suitable for larger and heavier non-formula cars on the track.

Temperature range 400-1560° F

Very High Torque - High Initial Bite

Fitment: Front
$597.57
Fixed UPS Ground shipping!
Fitment: Rear
$409.05
Fixed UPS Ground shipping!
Ferodo DSUNO Brake Pads

Ferodo DSUNO is a sprint compound designed for high friction, high temperature track use.

Temperature range 250-1650° F

High Torque - High Initial Bite

Fitment: Front
$595.99
Fixed UPS Ground shipping!
Fitment: Rear
$409.47
Fixed UPS Ground shipping!
Ferodo DS1.11 Brake Pads

Ferodo DS1.11 is designed for medium to high friction and high temperature track use.

Temperature Range 400° - 1300° F

High Torque - High Initial Bite

Fitment: Front
$595.99
Fixed UPS Ground shipping!
Fitment: Rear
$368.53
Fixed UPS Ground shipping!
Raybestos ST41 Brake Pads Raybestos ST-41 racing brake pads are suited for racing and very hard track use.
- Very high friction and high temperature fade resistance
- Immediate cold response with very high torque at all temperatures
- Best for hard track use and racing tires

These are Raybestos Production Pads.
RAYBESTOS INVENTORY IS CURRENTLY EXTEMELY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Rear
$233.94
Raybestos ST43 Brake Pads Raybestos ST-43 racing brake pads are one of the longest life racing pads on the market.
- Medium to high friction with predictable torque increase with temperature
- Very low wear rate when kept in temperature
- Best for endurance applications and on higher HP/weight street tire cars

These are Raybestos Production Pads.
RAYBESTOS INVENTORY IS CURRENTLY VERY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Front
$400.00
Fitment: Rear
$200.00
Raybestos ST45 Brake Pads Raybestos ST-45 racing brake pads are designed for racing and hard track use.
- Consistent, stable mid to high-level friction. Next step up from ST-43
- Lower wear rate with high fade resistance
- Best for harder track use with track oriented and/or race tires

These are Raybestos Production Pads.
RAYBESTOS INVENTORY IS CURRENTLY VERY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Rear
$183.01
Raybestos ST45 Brake Pads - Custom Raybestos ST-45 racing brake pads are designed for racing and hard track use.
- Consistent, stable mid to high-level friction. Next step up from ST-43
- Lower wear rate with high fade resistance
- Best for harder track use with track oriented and/or race tires

These are Raybestos CUSTOM Brake Pads. Allow 5-10 days for production
RAYBESTOS INVENTORY IS CURRENTLY VERY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Front
$359.00
Raybestos ST47 Brake Pads Raybestos ST-47 racing brake pads are suited for racing and very hard track use.
- Very high friction and high temperature fade resistance
- Immediate cold response with very high torque at all temperatures
- Best for very hard track use and racing tires

These are Raybestos Production Pads.
RAYBESTOS INVENTORY IS CURRENTLY VERY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Rear
$233.94
Raybestos ST47 Brake Pads - Custom Raybestos ST-47 racing brake pads are suited for racing and very hard track use.
- Very high friction and high temperature fade resistance
- Immediate cold response with very high torque at all temperatures
- Best for very hard track use and racing tires

These are Raybestos CUSTOM Brake Pads. Allow 5-10 days for production
RAYBESTOS INVENTORY IS CURRENTLY VERY LIMITED. PLEASE INQUIRE AS IT CHANGES FREQUENTLY!!
Fitment: Front
$389.00
Pagid RS14 Race Pads Medium to high friction compound with good initial bite, very good modulation and controllability. Low wear rate and fade resistant up to 1,200°F (650°C).
Fitment: Front
$488.94
Fitment: Rear
$276.89
Pagid RS42 Race Pads Medium friction compound with medium initial bite amd immediate low temperature response. Very easy bedding process. Fading resistance up to 930°F (500°C).
Fitment: Rear
$279.66
Pagid RS44 Race Pads Medium friction compound with medium initial bite and excellent modulation. Very good rear pad for RWD front engine and FWD cars. Fading resistance up to 1,050°F (560°C).
Fitment: Rear
$276.89
Pagid RSL1 Race Pads Long distance/endurance compound with very good pad and disc wear, as well as friction stability vs. temperature. Low pedal effort, slightly progressive in-stop behavior but still good modulation.
Fitment: Front
$638.56
Fitment: Rear
$376.47
Pagid RSL29 Race Pads Combines the outstanding wear rate of the RS19 with a slightly higher initial bite and torque.
Fitment: Front
$569.04
Fitment: Rear
$335.60
Pagid RST1 Race Pads High friction compound with very good initial bite and a progressive torque curve. Very fade resistant. Suitable for applications with high down-force and / or very high grip.
Fitment: Front
$587.77
Fitment: Rear
$348.89
Pagid RST2 Race Pads Medium to high friction and fade resistant compound with a mild progressive torque curve and good pedal feel. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.
Fitment: Rear
$348.89
Pagid RST3 Race Pads Medium to high friction metal-ceramic type compound with good initial bite and still excellent modulation and release characteristics. Medium torque, fade resistant up to 1472°F (800°C). Lowest thermal conductivity in the RST range.
Fitment: Front
$514.12
Fitment: Rear
$313.72
Pagid RST4 Race Pads Medium friction, high heat tolerance with consistent repeatability. Also used for rear axle applications FWD cars and on long oval racing where more aggressive materials would disturb the vehicle set up. Recommended for formula and open wheel racing.
Fitment: Rear
$307.63
Pre Bedded Brake Pads

Pre bedding is available for Carbotech and G-LOC brake pads.

This process is strongly suggested for Carbotech XP24 and G-LOC R18 compounds.

Fitment: N/A
$20.00
Free UPS Ground shipping!
Brake Pad Burnishing

Pad burnishing is available for Ferodo brake pad compounds. Essex will Dyno Burnish your pads at the time of order and they will arrive ready to install.

Fitment: N/A
$75.00
Free UPS Ground shipping!
Brake Rotor Burnishing

Rotor burnishing helps minimize potential judder, vibration, and rotor cracking issues. It is available for AP Racing BBK brake rotors and AP Racing replacement rotor rings. Essex will Dyno Burnish your discs at the time of order and they will arrive ready to install.

Fitment: N/A
$100.00
Free UPS Ground shipping!